SHOW command cisco

SHOW COMMANDS

·  Show access-lists - all access lists on the router

·  Show cdp - cdp timer and holdtime frequency

·  Show cdp entry * - same as next

·  Show cdp neighbors detail - details of neighbor with ip add and ios version

·  Show cdp neighbors - id, local interface, holdtime, capability, platform portid

·  Show cdp interface - int’s running cdp and their encapsulation

·  Show cdp traffic - cdp packets sent and received

·  Show controllers serial 0 - DTE or DCE status

·  Show dialer - number of times dialer string has been reached, other stats

·  Show flash - files in flash

·  Show frame-relay lmi - lmi stats

·  Show frame-relay map - static and dynamic maps for PVC’s

·  Show frame-relay pvc - pvc’s and dlci’s

·  Show history - commands entered

·  Show hosts - contents of host table

·  Show int f0/26 - stats of f0/26

·  Show interface Ethernet 0 - show stats of Ethernet 0

·  Show ip - ip config of switch

·  Show ip access-lists - ip access-lists on switch

·  Show ip interface - ip config of interface

·  Show ip protocols - routing protocols and timers

·  Show ip route - Displays IP routing table

·  Show ipx access-lists - same, only ipx

·  Show ipx interfaces - RIP and SAP info being sent and received, IPX addresses

·  Show ipx route - ipx routes in the table

·  Show ipx servers - SAP table

·  Show ipx traffic - RIP and SAP info

·  Show isdn active - number with active status

·  Show isdn status - shows if SPIDs are valid, if connected

·  Show mac-address-table - contents of the dynamic table

·  Show protocols - routed protocols and net_addresses of interfaces

·  Show running-config - dram config file

·  Show sessions - connections via telnet to remote device

·  Show startup-config - nvram config file

·  Show terminal - shows history size

·  Show trunk a/b - trunk stat of port 26/27

·  Show version - ios info, uptime, address of switch

·  Show vlan - all configured vlan’s

·  Show vlan-membership - vlan assignments

·  Show vtp - vtp configs